TO92

TO92

The TO-92 is a widely-used style of transistor enclosure construction. The case is often made of epoxy or plastic, and offers compact size at a very low cost.

History and Origin

The TO-92 descriptor is derived from the original full name for the package: Transistor Outline Package, Case Style 92.

Construction and Orientation

The case is molded around the transistor elements in two parts; the face is flat, bearing a machine-printed part number.

The back is semi-circularly-shaped. By looking closely from the top, one can observe the seam where the two halves are molded together.

The leads protrude from the bottom of the case. When looking at the face of the transistor, the leads are commonly configured from left-to-right as the "emitter", "base", and "collector", however, other configurations are possible.

Units with their leads pre-bent may be ordered to fit specific board layouts, depending on the application. Otherwise, the leads may be bent manually; however, care must be taken as they can break easily.

Advantages

* Transistors of this type can be made very inexpensively and take up very little board space. Most models cost under 10 cents each, and are readily available in large quantities from wholesale distributors.

* They are easy to find in small electronics stores because of their wide usefulness, making them a popular choice for hobby work and prototyping.

Disadvantages

* This type of transistor is easily susceptible to heat damage, and can burn out quickly if they dissipate excessive power.

* Many models are easily vulnerable to electrostatic discharge (ESD).

* Transistors of these types cannot handle as much power as higher-power equivalents, such as the TO-220.

More often than not, however, the disadvantages concerning accidental destruction are greatly outweighed by the low cost of producing these units.

Common Transistors that use this case

*BC548, NPN
*BC558, PNP
*2N3904, General purpose NPN
*2N3905, PNP
*2N3906, General purpose PNP
*2N7000, N-Channel FET
*PN2222A, 2N2222 NPN

Additional uses of the TO-92 case

*MK484, AM radio IC
*78L05, 79L05, 78L12, 79L12 voltage regulators
*TCR1AM, Triac


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • TO92 — TO 92 Boîtiers TO 92 …   Wikipédia en Français

  • TO92 — Внешний вид корпуса TO92 (Transistor Outline Packgage, Case Style 92)  распространённый тип корпуса для маломощных транзисторов и других полупроводниковых приборов с тремя выводами, в том числе и микросхем (например, интегральных… …   Википедия

  • TO92 — Cuatro vistas del encapsulado TO 92 …   Wikipedia Español

  • 1-Wire — An iButton in a plastic fob, as used for Istanbul Akbil smart ticket 1 Wire is a device communications bus system designed by Dallas Semiconductor Corp. that provides low speed data, signaling, and power over a single signal.[1] 1 Wire is similar …   Wikipedia

  • 2N7000 — The 2N7000 is a N channel, enhancement mode MOSFET used for small signal switching applications. Packaged in a TO92 enclosure, the 2N7000 is a 60 volt device capable of switching in the 200 350 milliamp range with an on resistance of 0.3 5 ohms.… …   Wikipedia

  • TO-92 — Boîtiers TO 92 Vue de face d un TO 92 …   Wikipédia en Français

  • 78xx — Varios circuitos integrados 78XX. 78xx es la denominación de una popular familia de reguladores de tensión positiva. Es un componente común en muchas fuentes de alimentación. Tienen tres terminales (voltaje de entrada, masa y voltaje de salida) y …   Wikipedia Español

  • Пентод — Условное графическое обозначение пентода косвенного накала. Сверху вниз:  • анод,  • антидинатронная сетка,  • экранирующая сетка,  • управляющая сетка,  • катод и  • подогреватель (два вывода) …   Википедия

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”