Coffee extraction

Main article: Coffee preparation

Proper brewing of coffee requires using the correct amount of coffee grounds, extracted to the correct degree (largely determined by the correct time), at the correct temperature.

Concepts

More technically, coffee brewing consists of dissolving (solvation) soluble flavors from the coffee grounds in water. Specialized vocabulary and guidelines exist to discuss this, primarily various ratios, which are used to optimally brew coffee. The key concepts are:^[1]

Extraction

Also known as "solubles yield" – what percentage (by weight) of the grounds are dissolved in the water.

Strength

Also known as "solubles concentration", as measured by Total Dissolved Solids – how concentrated or watery the coffee is.

Brew ratio

The ratio of coffee grounds (mass, in grams or ounces) to water (volume, in liters or half-gallons): how much coffee is used for a given quantity of water.

These are related as follows:

Strength = Brew ratio × Extraction

which can be analyzed as the following identity:

dissolved solids/water = grounds/water × dissolved solids/grounds

A subtler issue is which solubles are dissolved – this depends on solubility of different substances at different temperatures, changes over the course of extraction (different substances are extracted during the first 1% of extraction than in the period from 19% extraction to 20% extraction), and is primarily affected by temperature.

External images
	SCAA brew chart (American)[2]
	SCAE brew chart (European)[3]
	NCA brew chart (Norwegian)[4]

Brewing guidelines are summarized in Brewing Control Charts, which graph these elements, and center around an "ideal" rectangle indicating the target brewing range. The yield in the horizontal (x-axis), the strength is the vertical (y-axis), and a given brewing ratio determines a radial line, since for a giving brewing ratio the strength is directly proportional to the yield.

In brief, ideal yield is widely agreed to be 20%±2% (18%–22%), while ideal strength (for brewed coffee) varies between 1.25%±.10% (1.15%–1.35%) in American standards, to 1.40%±.10% (1.30%–1.50%) in Norwegian standards, with European standards falling in the middle at 1.20%–1.45%). This is most easily achieved with a brewing ratio of 55 g/L (55 grams of coffee per 1 L of water) in American standards, to 63 g/L in Norwegian standards, yielding approximately 14–16 grams of coffee for a standard 240 ml (8 oz) cup.

These guidelines apply regardless of brewing method, with the following exceptions: espresso is significantly different (much stronger, and more varied extraction), and dark roasts taste subjectively stronger than medium roasts (standards are based on medium roasts; equivalent strength requires using a lower brewing ratio for darker roasts).

These components are addressed in turn.

Extraction yield

Ideal yield is widely agreed to be 20%±2% (18%–22%). This was originally computed by the Coffee Brewing Institute, under the direction of Professor E. E. Lockhart at MIT in the 1950s, and has been verified by subsequent tests by the SCAA.

Yields of under 18% are "under-extracted", specifically "under-developed" – desirable components have not been sufficiently extracted – and "unbalanced", specifically sour, because acids are extracted early, while balancing sugars (sweetness) and bitter components are extracted later.^[5]

Yields of over 22% are "over-extracted", specifically bitter, as bitter components continue to be extracted after acids and sugars have largely completed extraction.

Yields depend primarily on temperature, brew time, and grind size, and in a complex way on method. Yield is inverse to grind size (smaller grinds have more surface area, so extract faster) and increases roughly linear with time, as the extraction proceeds. Thus for a given temperature and grind size, there is an ideal brew time, with larger grinds requiring longer brewing. French press features the largest grinds of conventional methods, hence the longest brewing, on the order of 3–4 minutes, while filter coffee has smaller grinds and shorter brewing, and espresso has yet smaller grinds and shorter brewing, on the order of 20–30 seconds.

Caffeine is extracted early, so higher yields do not yield more caffeinated coffee, only over-extracted coffee.

Once ideal yield has been reached, the grounds must be removed from the liquid, otherwise extraction continues and the coffee will grow increasingly over-extracted. For this reason, it is advised to pour out a French press when it has finished brewing, and percolators are frowned upon.

It is possible to use less ground coffee and over-extract it to achieve a desired strength, which economizes on coffee but yields a bitterer, less tasty beverage.

Water temperature is subtler but crucial to the proper extraction of flavor from the ground coffee, as it affects the proportions in which solubles are extracted – one wishes to extract the desired flavors as much as possible, and the undesirable flavors as little as possible. The recommended brewing temperature of coffee is 200 °F (93 °C), which is a trade-off between these goals. If cooler, some of the solubles that make up the flavor will not be extracted. If the water is too hot, some undesirable, bitter, elements will be extracted, adversely affecting the taste.

Transient temperature is not very significant: if coffee is heated to boiling point only very briefly, the taste will be little affected; the longer it is kept at a high temperature the worse the taste becomes.

Strength

Strength refers to the amount of dissolved coffee solids per unit of coffee liquid volume. An espresso, specifically a ristretto, is the strongest of coffee drinks, meaning that it takes the same amount of coffee solubles and dissolves it in significantly less water. For example, a 20% extraction of 15 grams of espresso in a double shot (60 mL) yields 3 grams per 60 mL, or 5% strength, which is 3–4× typical brewed coffee strength.

Adding water to dilute a drink after brewing affects strength but not yield (as the grounds are no longer present) – an Americano differs from an espresso simply is being weaker, more dilute (American preparation may also eliminate the crema).

Stronger coffee (assuming the same extraction yield) is not more bitter than weaker coffee, but simply has more solids. This is reflected in being darker and in thicker mouthfeel (oilier), though mouthfeel also depends on suspended solids (very small grinds, so-called "fines"), particularly in French press as opposed to filter.

Unlike yield, desired strength varies measurably between regions, and, assuming proper (20%) yield, strength is determined by brewing ratio – how much ground coffee is used for a particular drink.^[6] Coffee above the ideal may be considered "too strong", while coffee below the ideal may be considered "too weak", but individual tastes vary significantly.

Brewing ratio

The usual ratio of coffee to water for the style of coffee most prevalent in Europe, America, and other Westernized nations (evident in publications such as textbooks on coffee and instruction manuals for drip-brew machines) is between one and two tablespoons of ground coffee per six ounces (180 millilitres) of water; the full two tablespoons per six ounces tends to be recommended by experienced coffee lovers.

The ideal brewing ratio is determined by which brewing ratio line in the control chart most intersects the ideal rectangle, or passes through the center (the subtle distinctions about exactly which line is ideal is generally considered too minor to comment, and changes brew ratio by only a small amount). This ideal ratio makes it most likely that one will land in the rectangle and near the center, and gives the widest room for error.

Brewing method

Extraction depends in subtle and complex ways on brewing method. Simplest is directly mixing the grounds and water, as in cupping, press pot, and vacuum brewing. Note that in Turkish coffee, the grounds are very finely ground and not removed from the water – this yields essentially 100% extraction of the solubles (over-extraction by Western standards), and suspension of the remaining insoluble parts of the grounds in the water. Significantly more complicated is brewing via soaking a column of grounds, as in filter, espresso, or percolation – in this case the water soaks and moves through the column of grounds, and (if there is water on top, as in espresso or percolation), a gradient develops over the column.

Espresso

Espresso yield is generally 15–25%:^[5] 25% is quoted as the Italian extraction in (Illy 2005). Espresso yield has received significantly less attention in the literature than brewed coffee extraction, with the main references being (Illy 2005) and (Shulman 2007).

Espresso yield features a number of surprising properties:^[5]

• yield depends primarily on depth of the "puck" (cylinder of coffee grounds);
• yield is inverse to puck depth;
• yield does not depend significantly on brewing time – yield at first increases approximately linearly, then plateaus after approximately 20 seconds;
• strength is independent of dose.

Strength depends instead on grind: finer grinds yield a "shorter" (ristretto) espresso (less liquid, so higher brew ratio, at same yield gives more strength), while coarser grinds yield a "longer" (lungo) espresso, while an intermediate grind yields a "normale" espresso.

References

1. ^ (Lingle 1995)
2. ^ Brewing -- the American Standard
3. ^ Brewing -- the European Standard
4. ^ Brewing -- the Norwegian Coffee Association Standard
5. ^ ^{a b c} (Shulman 2007)
6. ^ Baldwin, Jerry (March 31, 2009), "Don't Be Afraid of Strong Coffee!", The Atlantic, http://www.theatlantic.com/food/archive/2009/03/dont-be-afraid-of-strong-coffee/1360/, retrieved 2010-03-28 

• Illy; Vianni (2005), Espresso Coffee: the Science of Quality, Chapter 7, by M. Petracco. 
• Lingle, Ted R. (1995), The Coffee Brewing Handbook (First ed.), Specialty Coffee Association of America 
• Brewing -- How to Get the Most Out of Your Coffee, Mountain City Coffee Roasters