18th FAI World Precision Flying Championship

18th FAI World Precision Flying Championship

18th FAI World Precision Flying Championship took place between July 13 - July 19, 2008 in Ried im Innkreis in Austria, altogether with the 16th FAI World Rally Flying Championship (July 20-26).

There were 62 competitors from 13 countries: Czech Republic (10), Poland (9), Austria (9), France (6), United Kingdom (6), Russia (4), South Africa (4), New Zealand (3), Germany (3), Switzerland (3), Denmark (2), Sweden (2), Slovenia (1).

Most numerous airplane was Cessna 152 (31 pilots), then Cessna 150 (16) and Cessna 172 (6). There were also two Glastars and Zlin Z-43's, single Zlin Z-42, 3Xtrim, Piper PA-18 , HB-23 and Van's RV-7A (the numbers of aircraft participating was lower, for some pilots flew the same aircraft).

Results

Individual:

Team:

Number of penal points and place of three best competitors:
#flagcountry|Czech Republic - 612 pts
## Luboš Hájek - 110 pts, #1
## Michal Filip - 227 pts, #4
## Petr Opat - 275 pts, #6
#flagcountry|Poland - 711 pts
## Wacław Wieczorek - 173 pts, #2
## Michał Wieczorek - 254 pts, #5
## Michał Bartler - 284 pts, #7
#flagcountry|France - 1538 pts
## Patrick Bats - 429 pts, #12
## Eric Daspet - 505 pts, #15
## David Le Gentil - 604 pts, #23
#flagcountry|Austria - 1849 pts
##Anton Tonninger, jr. - 565 pts, #18
## Wolfgang Schneckenreither - 596 pts, #22
## Paul Szameitat - 688, #28
#flagcountry|Switzerland - 3348 pts
#flagcountry|Germany - 3562 pts
#flagcountry|United Kingdom - 3944 pts
#flagcountry|Russia - 4212 pts
#flagcountry|South Africa - 5125 pts
#flagcountry|New Zealand - 6590 pts

References

*http://events.fai.org/ga/EventDetails.asp?id=4306 18th FAI World Precision Flying Championship]
* [http://www.ried2008.at/ergebnis-precision-detail.html?uid=12 Results]

ee also

*17th FAI World Precision Flying Championship
*16th FAI World Rally Flying Championship


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”