BS 7671

British Standard BS 7671 "Requirements for electrical installations" is the national standard in the United Kingdom for low voltage electrical installations. It is also used as a national standard by Mauritius, St Lucia, Saint Vincent and the Grenadines, Sierra Leone, Sri Lanka, Trinidad and Tobago, and Uganda, and several other countries base their wiring regulations on BS 7671. The IET (formerly IEE) has published wiring regulations in the United Kingdom since 1882. Since their 15th edition (1981), these regulations have closely followed the corresponding international standard IEC 60364. Today, they are largely based on European CENELEC harmonization documents, and therefore are technically very similar to the current wiring regulations of other European countries. In 1992, the IEE Wiring Regulations became British Standard BS 7671 and they are now treated similar to other British Standards. They are maintained by the Joint IET/BSI Technical Committee JPEL/64, the UK National Committee for Wiring Regulations. Although the IET and BSI are non-governmental organizations and the Wiring Regulations are non-statutory, they are referenced in several UK statutory instruments.

The BSI publish numerous titles concerning acceptable standards of design/safety/quality etc. in various fields. BS 7671 : 2001 (AMD No 2 : 2004) concerns the safety of electrical wiring in buildings (dwellings, commercial, industrial or otherwise) – generally known as the "Regs" (wiring regulations) – and succeeds the previous publication the 16th Edition of the Wiring Regulations.

The On-Site Guide is a handbook that contains some information not in BS 7671:2001. It is meant as a handy notebook reference for electricians working on building sites.

The 17th edition has been released in mid-January 2008 and will come into effect 6 months later [Geoff Cronshaw: [http://www2.theiet.org/Publish/WireRegs/WiringMatters/Documents/Issue23/2007_23_summer_wiring_matters_brief_overview_17th_edition.pdf The 17th edition: a brief overview] . IEE Wiring Matters, Summer 2007.] . One of the more significant changes is (chapter 41) that 30 mA RCDs will be required for socket outlets that are for use by ordinary persons and are intended for general use. This improves the level of protection against electrical shock in the UK to a level comparable to that in other EU countries. The 17th edition incorporates new sections relating to microgeneration and solar photovoltaic systems.

References

ee also

*British Standards
*Electrical wiring
*Electrical wiring (UK)
*IEC 60364
*Earthing system