Schweizer SGS 1-29

__NOTOC__

The Schweizer SGS 1-29 is a United States single-seat, mid-wing, experimental laminar flow airfoil glider built by Schweizer Aircraft of Elmira, New York.Said, Bob: "1983 Sailplane Directory, Soaring Magazine", page 32. Soaring Society of America, November 1983. USPS 499-920]

The 1-29 is a development of the Schweizer SGS 1-23 that utilizes a 1-23 fuselage and a newly constructed set of 49.2 foot (15.0 m) span wings.

The aircraft was constructed to study the feasibility of producing improved boundary layer laminar flow on a metal-winged sailplane. Only one SGS 1-29 was produced and the project was not pursued further.

Background

In the mid-1950s the SGS 1-23 was in full production and through successive models was performing very well in competition. By 1957 the development of fiberglass-reinforced plastic had an impact on the production of many sporting goods, such as boats and fishing rods. Schweizer Aircraft thought it was only a matter of time before a fiberglass sailplane was produced. This concern was borne out in 1965, when two German fiberglass sailplanes were entered in the world championships.

Schweizer Aircraft evaluated the use of fiberglass for sailplane construction and rejected it for several reasons:

*The high cost of demonstrating to the Federal Aviation Administration that this new material could safely be used for aircraft primary structure.
*Problems with crash resistance of fiberglass structures in high impact accidents.
*The unknown service life of fiberglass.
*The high degree of manual labor required to do fiberglass lay-ups at that time and the associated cost.

The company decided to concentrate on getting the best performance from the material that it knew best, aluminum.

Schweizer created several design studies of new sailplanes in the mid-1950s. These included: cite web|url = http://siris-thesauri.si.edu/ipac20/ipac.jsp?session=L21C5106397I7.28&profile=planes&uri=link=3100020~!50526~!3100001~!3100002&aspect=subtab13&menu=search&ri=4&source=~!sithesauri&term=Schweizer+7+28&index=|title = Directory of Airplanes|accessdate = 2008-05-13|last = Smithsonian Institution|authorlink = |year = 2004]

*Schweizer 2-27
*Schweizer 7-28
*Schweizer SGS 1-29
*Schweizer 1-30 Motorized Glider

Of these, only the SGS 1-29 proceeded to prototype stage.

Development

The 1-29 was constructed using a modified SGS 1-23G fuselage. New wings were built for the aircraft to determine if better laminar flow could be achieved on a metal wing.

The wings were all-metal and of constant chord. The wing ribs were identical and created from a single master die to ensure uniformity. The wing features a thick, deep spar to reduce wing flexing and "oil-canning" that might interrupt laminar flow. The wing was assembled using flush rivets and has balanced top and bottom dive brakes.

The aircraft first flew in 1958 and flight testing was reported by Schweizer Aircraft as on-going though 1959.

The 1-29 program did yield positive results. The standard production model SGS 1-23H-15 with the same fuselage and wingspan as the 1-29 and a NACA 43012A airfoil, produced a best glide ratio of 29:1. With its laminar flow wing and NACA 63-618 airfoil the 1-29 recorded a 34:1 glide ratio, an improvement of 15%.

Certification

The 1-29 design was never certified and the sole aircraft that was built is an experimental aircraft in the "racing, exhibition" class and registered as N3898A. cite web|url = http://registry.faa.gov/aircraftinquiry/NNumSQL.asp?verified=1&NNumbertxt=3898A|title = FAA Registry|accessdate = 2008-05-27|last = Federal Aviation Administration|authorlink = |year = 2008|month = May]

Competition flying

The 1-29 was flown in at least three US national competitions by Paul A Schweizer, Bill Ivans and Tom Smith.

Museum

Once the 1-29 test program was complete, the aircraft was donated to the National Soaring Museum where it is currently listed as being in storage. cite web|url = http://www.soaringmuseum.org/collection.html|title = Sailplanes in Our Collection|accessdate = 2008-04-15|last = Munson|first = J.|authorlink = |year = undated]

pecifications

aerospecs
ref=
met or eng?= eng

crew=One
capacity=
length m=
length ft=
length in=
span m=15.00
span ft=49
span in=3
swept m=
swept ft=
swept in=
rot number=
rot dia m=
rot dia ft=
rot dia in=
dia m=
dia ft=
dia in=
width m=
width ft=
width in=
height m=
height ft=
height in=
wing area sqm=15.3
wing area sqft=154
swept area sqm=
swept area sqft=
rot area sqm=
rot area sqft=
volume m3=
volume ft3=
aspect ratio= 15.75
wing profile= NACA 63-618
empty weight kg=224
empty weight lb=465
gross weight kg=340
gross weight lb=750
lift kg=
lift lb=

eng1 number=
eng1 type=
eng1 kw=
eng1 hp=
eng1 kn=
eng1 lbf=
eng1 kn-ab=
eng1 lbf-ab=
eng2 number=
eng2 type=
eng2 kw=
eng2 hp=
eng2 kn=
eng2 lbf=
eng2 kn-ab=
eng2 lbf-ab=

max speed kmh=
max speed mph=
max speed mach=
cruise speed kmh=
cruise speed mph=
range km=
range miles=
endurance h=
endurance min=
ceiling m=
ceiling ft=
glide ratio= 34 at 52 mph (83 km/h)
climb rate ms=
climb rate ftmin=
sink rate ms= 0.63
sink rate ftmin= 123

armament1=
armament2=
armament3=
armament4=
armament5=
armament6=

ee also

aircontent
see also=
related=
similar aircraft=
lists=
*List of experimental aircraft
*List of gliders

References

External links

* [http://www.sailplanedirectory.com/PhotoOriginal.cfm?PhotoName=308_1_B.jpgPhoto of the SGS 1-29]