Caterpillar D10

The Caterpillar D10 is a track-type tractor manufactured by Caterpillar Inc. (then called the Caterpillar Tractor Company). It was the first to use the elevated drive sprocket to improve durability, operator comfort, and ease of maintenance.

History and features

The first pilot D10 was D10X1 and was shown in July 1973 at a big Caterpillar corporate meeting.Other prototypes would follow in 1975 and 1977.In March 1977 prototypes P-1 thru P-10 would be appear and dispatched to different job sites.The Caterpillar D10 was the result of a need for a tractor larger than the Caterpillar D9. At this time, competitors were building bulldozers that were more powerful than the D9. Allis Chalmers introduced at Conexpo 69 in Chicago a convert|524|hp|abbr=on HD-41 which was the largest crawler in the world. In 1974 after AC and Fiat merged their construction equipment divisions the 524hp 41-B was introduced. For example, the Fiat-Allis 41-B track-type tractor had 524horsepower (391 kW) at the time, while the D9H had convert|410|hp|abbr=on. In 1976 Japanese company Komatsu came out with an even larger bulldozer called the D455A at convert|620|hp|abbr=on and convert|167000|lb|abbr=on. The D10 was so big that it could do about 50 percent more production that the then D9H.

The D10 was introduced at a dealer meeting by Caterpillar in the fall of 1977. Between 1978 and 1986 nearly 1,000 D10s were made at Caterpillar's East Peoria plant.The D10 had sales of their Fiat-Allis/Komatsu competitive sized bulldozers combined.With the introduction of the N-Series tractors in 1986-87 their model numbers were pushed up.For example the D9N replaced the D8L,the D10N replaced the D9L and the D11N replaced the D10

Advantages and disadvantages of the High Drive system

The high drive (elevated sprocket) design is unique to Caterpillar bulldozers. It eliminates the final drive system, which tended to break frequently. This elevated drive sprocket undercarriage was built in modular form. You can break down the tracks and then pull out the drive sprockets. From the back you can pull the transmission out because of the modular design. As the engine and drivetrain are mounted high in a traditional bulldozer, the half shafts from the differential exit above the drive sprocket, requiring a small gear on the end of the half shaft and another, larger one attached to the drive sprocket. The high-drive system eliminates the traditional final drive in favor of the planetary final drive, which is more effective at withstanding engine torque, since it spreads the forces over multiple gear teeth instead of a single tooth as in the traditional system. The disadvantage is that the track moves around one more sprocket, reducing track life. Caterpillar claims to have alleviated this with the SALT(Sealed and Lubricated Track), a permanently lubricated track system which was introduced on their track-type tractors in the early 1970s

Introduction of the D10

When the D10 was introduced in 1977, it was the most powerful track-type tractor ever built at convert|700|hp . The Cat D10 could be ordered with up to a convert|19|ft|m|sing=on U-blade, and weighed in at convert|180000|lb|abbr=on.Later versions weighed in at convert|190000|lb|abbr=on The U-blade was convert|7|ft|m high and could push convert|35|yd according to Caterpillar's literature. The November 1977 issue of Excavating Contractor magazine had a 2 page story on the bulldozer titled "Cat Uncorks The New D10". One of the first D10s is currently sitting in front of the East Peoria, Ill plant where it was made.A picture of this D10 can found on pages of a book titled"The Caterpillar Century" on pages 298-297. Caterpillar put the 1,786 cid V-12 twin turbocharged D348 in the D10 to power it. This had already proven itself in the 777 off-highway hauler and the 550hp 10 yard 992/992B wheel loaders from 1968 on. The early D10s came with a single big black exhaust stack up front. But some engine problems came up with exhaust system routing which resulted in in 2 exhaust stacks up front to correct this problem. This new look took root in 1980. At the time Caterpillar's bulldozer lineup was the convert|62|hp|abbr=on D3, convert|75|hp|abbr=on D4E, convert|105|hp|abbr=on D5B, convert|140|hp|abbr=on D6D, convert|200|hp|abbr=on D7G, convert|300|hp|abbr=on D8K, and convert|410|hp|abbr=on D9H with the addition of the convert|700|hp|abbr=on D10.

In 1986 an even larger dozer, the convert|770|hp|abbr=on Caterpillar D11N was introduced to replace the D10. The D11 carried on the success of the elevated drive sprocket system in large bulldozers. The currently available D10T model, and preceding D10R and D10N variants, are not the original D10's successors but the D11N,D11R and the current D11T are.

External links

* [http://www.cat.com/cda/layout?m=163632&x=7 Caterpillar D-Series Track-Type Tractors] — Official Caterpillar website