- Electric pen
.
The electric pen was developed as an offshoot of Edison's
telegraphy research.Thomas Edison andCharles Batchelor noticed that as thestylus of their printing telegraph punctured the paper, the chemical solution left a mark underneath. This led Edison to conceive in June of1875 the idea of using a perforated sheet of paper as a stencil for making multiple copies, and to develop the electric pen as a perforating device. Later duplicating processes used a wax stencil, but the instruction manuals for Edison's Electric(al) Pen and Duplicating Press variously call for a stencil of "common writing paper" (in Charles Batchelor's manual), and "Crane's Bank Folio" paper (in George Bliss' later manual). US patent [http://edison.rutgers.edu/patents/00180857.PDF 180,857] forautographic printing was issued toThomas Edison in1876 , covering the pen, the duplication press, and accessories.The electric pen was the key component of a complete duplicating system, which included the pen, a cast-iron holder with a wooden insert, a wet-cell battery on a cast-iron stand, and a cast-iron flatbed duplicating press with ink roller. All the cast-iron parts were black japanned, with gold striping or decoration. The hand-held electric pen was powered by a
wet cell battery, which was wired to anelectric motor mounted on top of a pen-like shaft. The motor drove areciprocating needle which, according to the manual, could make 50 punctures per second, or 3,000 per minute. The user was instructed to place the stencil on firmblotting paper on a flat surface, then use the pen to write or draw naturally to form words and designs as a series of minute perforations in the stencil.Once the
stencil was prepared it was placed in the flatbed duplicating press with a blank sheet of paper below. An inked roller was passed over the stencil, leaving an impression of the image on the paper. Edison boasted that over 5,000 copies could be made from one stencil. The electric pen proved ultimately unsuccessful, other simpler methods (and eventually thetypewriter ) succeeding it for cutting stencils, but Edison licensed his duplicating technology to A.B. Dick, who sold it as "Edison's Mimeograph" with considerable success. TheA.B. Dick company is still in business today as an office products and equipment manufacturer.See also
*
duplicating machines
*List of duplicating processes References
* [http://edison.rutgers.edu/about.htm Edison Papers Project]
* [http://electricpen.org Edison's Electric Pen website]
Wikimedia Foundation. 2010.