Idler arm

Idler arm

On an automobile or truck with conventional parallelogram steering, the Idler Arm or idler arm assembly is a pivoting support for the steering linkage.

The idler arm consists of a rod which pivots on a bracket attached to the frame of the vehicle on one end and supports a ball joint on the other end. Generally, an idler arm is attached between the opposite side of the center link from the Pitman arm and the vehicle's frame to hold the center link at the proper height. Idler arms are generally more vulnerable to wear than Pitman arms because of the pivot function built into them. If the idler arm is fitted with grease fittings, these should be lubricated with a grease gun at each oil change.


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • idler arm — In a parallel relay type steering linkage, it is one of the connecting levers. The steering gearbox is attached to a pitman arm which converts rotary motion to lateral motion. The pitman arm connects to a transverse centerlink which connects to… …   Dictionary of automotive terms

  • arm — A part attached to or projecting from something. Also see a arm a arm actuator arm ball joint rocker arm breaker arm check arm contact arm control arm crankarm door check arm …   Dictionary of automotive terms

  • Pitman arm — The Pitman arm is a steering component in an automobile or truck. The Pitman arm is a linkage attached to the steering gear (see recirculating ball) sector shaft, that converts the angular motion of the sector shaft into the linear motion needed… …   Wikipedia

  • pitman arm — A short lever arm splined to the steering gear cross shaft, the pitman arm transmits the steering force from the cross shaft to the steering linkage system. In this way rotary motion of the steering wheel is turned to lateral movement of the arm …   Dictionary of automotive terms

  • The Idler (1758–1760) — This article is about the 18th century series of essays. For other publications called The Idler, see The Idler (disambiguation). The Idler was a series of 103 essays, all but twelve of them by Samuel Johnson, published in the London weekly the… …   Wikipedia

  • center steering linkage — A steering system using two tie rods connected to the steering arms and to a central idler arm, the idler arm is operated by a drag link that connects the idler arm to the pitman arm …   Dictionary of automotive terms

  • Drag link — A drag link converts rotary motion from a crank to a second crank or link in a different plane or axis. The term is commonly used in automotive technology for the link in a four bar steering linkage that converts rotation of a steering arm to a… …   Wikipedia

  • drag link — A steel rod connecting the pitman arm to one of the steering knuckles. On some installations the drag link connects the pitman arm to a center idler arm …   Dictionary of automotive terms

  • Packard Clipper — The Packard Clipper was a model of the Packard Motor Car Company from 1941 to 1954, and the Studebaker Packard Corporation for 1955 and 1957. Clippers built for model year 1956 are considered a stand alone make, not a model of Packard.The 1941 47 …   Wikipedia

  • parallelogram steering linkage — A steering system using two short tie rods connected to the steering arms and to a long center link. The link is supported on one end on an idler arm and the other end is attached directly to the pitman arm. The arrangement forms a parallelogram… …   Dictionary of automotive terms

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”