Fluorescence lifetime imaging

Fluorescence lifetime imaging

Fluorescence lifetime imaging or FLIM is a powerful tool for producing an image based on the differences in the exponential decay rate of the fluorescence from a fluorescent sample. It can be used as an imaging technique in confocal microscopy, Two-photon excitation microscopy, and other microscope systems.

The lifetime of the fluorophore signal, rather than its intensity, is used to create the image in FLIM. This has the advantage of minimizing the effect of photon scattering in thick layers of sample. FLIM is very useful for biomedical tissue imaging, allowing to probe greater tissue depths than conventional fluorescence microscopy.

Fluorescence lifetimes

A fluorophore which is excited by a photon will drop to the ground state with a certain probability based on the decay rates through a number of different (radiative and/or nonradiative) decay pathways. To observe fluorescence, one of these pathways must be by spontaneous emission of a photon. In the ensemble description, the fluorescence emitted will decay with time according to

:F(t) = F_0 e^{-t/ au}

where

:frac{1}{ au} = sum_fwfi k_i.

In the above, t is time, au is the fluorescence lifetime, F_0 is the initial fluorescence at t=0, and k_i are the rates for each decay pathway, at least one of which must be the fluorescence decay rate k_f. More importantly, the lifetime, au, is independent of the initial intensity of the emitted light. This can be utilized for making non-intensity based measurements in chemical sensing.

Measurement and processing

Fluorescence lifetime imaging yields images with the intensity of each pixel determined by au, which allows one to view contrast between materials with different fluorescence decay rates (even if those materials fluoresce at the exact same wavelength), and also produces images which show changes in other decay pathways, such as in FRET imaging.

Pulsed illumination

Fluorescence lifetimes can be determined in the time domain by using a pulsed source. Time-correlated single photon counting (TCSPC) is usually employed because variations in source intensity and photoelectron amplitudes are ignored, the time resolution can be upwards of 4 ps, and the data obeys Poisson statistics (useful in determining goodness of fit during reconvolution).

When a population of fluorophores is excited by an ultrashort or delta pulse of light, the time-resolved fluorescence will decay exponentially as described above. However, if the excitation pulse or detection response is wide, the measured fluorescence, M(t), will not be purely exponential. The instrumental response function, IRF(t) will be convolved or blended with the decay function, F(t).

{M}(t) = {IRF}(t) otimes {F}(t)

The decay function (and corresponding lifetimes) cannot be recovered by direct deconvolution using Fourier transforms because division by zero will produce errors and noise will be amplified. However, the instrumental response of the source, detector, and electronics can be measured, usually from scattered excitation light. The IRF can then be convolved with a trial decay function to produce a calculated fluorescence, which can be compared to the measured fluorescence. The parameters for the trial decay function can be varied until the calculated and measured fluorescence curves fit well. This process is known as reconvolution or reiterative convolution, and can be performed quickly by several software packages.

Phase modulation

Alternatively, fluorescence lifetimes can be determined in the frequency domain by a phase-modulated method. The intensity of a continuous wave source is modulated at high frequency, by an acousto-optic modulator for example, which will modulate the fluorescence. Since the excited state has a lifetime, the fluorescence will be delayed with respect to the excitation signal, and the lifetime can be determined from the phase shift. Also, y-components to the excitation and fluorescence sine waves will be modulated, and lifetime can be determined from the modulation ratio of these y-components. Hence, 2 values for the lifetime can be determined from the phase-modulation method.

Applications

FLIM has primarily been used in biology as a method to detect FRET in instances where ratiometric imaging is difficult. The technique was developed in the late 1980s and early 1990s [cite journal |author=Oida T, Sako Y, Kusumi A |title=Fluorescence lifetime imaging microscopy (flimscopy). Methodology development and application to studies of endosome fusion in single cells |journal=Biophys. J. |volume=64 |issue=3 |pages=676–85 |year=1993 |month=March |pmid=8471720 |pmc=1262380 |doi= |url=http://www.biophysj.org/cgi/pmidlookup?view=long&pmid=8471720] , before being more widely applied in the late 1990s. In cell culture, it has been used to study EGF receptor signaling [cite journal |author=Wouters FS, Bastiaens PI |title=Fluorescence lifetime imaging of receptor tyrosine kinase activity in cells |journal=Curr. Biol. |volume=9 |issue=19 |pages=1127–30 |year=1999 |month=October |pmid=10531012 |doi= |url=http://linkinghub.elsevier.com/retrieve/pii/S0960-9822(99)80484-9] and ErbB1 receptor trafficking [cite journal |author=Verveer PJ, Wouters FS, Reynolds AR, Bastiaens PI |title=Quantitative imaging of lateral ErbB1 receptor signal propagation in the plasma membrane |journal=Science (journal) |volume=290 |issue=5496 |pages=1567–70 |year=2000 |month=November |pmid=11090353 |doi= |url=http://www.sciencemag.org/cgi/pmidlookup?view=long&pmid=11090353] . FLIM imaging is particularly useful in neurons, where light scattering by brain tissue is problematic for ratiometric imaging [cite journal |author=Yasuda R |title=Imaging spatiotemporal dynamics of neuronal signaling using fluorescence resonance energy transfer and fluorescence lifetime imaging microscopy |journal=Curr. Opin. Neurobiol. |volume=16 |issue=5 |pages=551–61 |year=2006 |month=October |pmid=16971112 |doi=10.1016/j.conb.2006.08.012 |url=] . In neurons, FLIM imaging using pulsed illumination has been used to study Ras [cite journal |author=Harvey CD, Yasuda R, Zhong H, Svoboda K |title=The spread of ras activity triggered by activation of a single dendritic spine |journal=Science (journal) |volume=321 |issue=5885 |pages=136–40 |year=2008 |month=July |pmid=18556515 |doi=10.1126/science.1159675 |url=] , CaMKII, and Rac family proteins.

Other Uses

In Liverpool, the word "flim" is a slang term for a five pound note.

References

* [http://www.loci.wisc.edu/optical/lifetime.html Fluorescence Excited-State Lifetime Imaging]

External links

* [http://www.lfd.uci.edu/ Laboratory for Fluorescence Dynamics]


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Fluorescence — Fluorescent minerals emit visible light when exposed to ultraviolet light Fluorescence is the emission of light by a substance that has absorbed light or other electromagnetic radiation of a different wavelength.[1] It is a form of luminescence.… …   Wikipedia

  • Chemical imaging — (as quantitative chemical mapping) is the analytical capability to create a visual image of components distribution from simultaneous measurement of spectra and spatial, time informations.[1][2] The main idea for chemical imaging, the analyst may …   Wikipedia

  • Biological imaging — may refer to any imaging technique used in biology.Typical examples include: * Bioluminescence imaging, a technique for studying laboratory animals using luminescent protein * Calcium imaging, determining the calcium status of a tissue using… …   Wikipedia

  • European Master in Molecular Imaging — (EMMI) is the first Master program in Europe (M1 + M2) exclusively dedicated to molecular imaging. It is an initiative from the active collaboration developed within the EMIL network of excellence (European Molecular Imaging Laboratories) that is …   Wikipedia

  • Chemical biology — is a scientific discipline spanning the fields of chemistry and biology that involves the application of chemical techniques and tools, often compounds produced through synthetic chemistry, to the study and manipulation of biological systems.… …   Wikipedia

  • Imagerie moléculaire — L’imagerie moléculaire est le nom donné à une discipline émergente d imagerie, située entre la biologie moléculaire et la biologie cellulaire. Elle vise essentiellement à observer le fonctionnement des organes et organismes in vivo par des moyens …   Wikipédia en Français

  • Fluoreszenzlebensdauer-Mikroskopie — Vergleich der konventionellen Fluoreszenzmikroskopie (A,D) mit der Fluoreszenzlebensdauer Mikroskopie (B,E) mit der dazugehörigen Verteilung der Fluoreszenzlebensdauern (C,F). Die Aufnahmen zeigen eingefärbte Zellkerne und die Abnahme der… …   Deutsch Wikipedia

  • List of materials analysis methods — List of materials analysis methods: Contents: Top · 0–9 · A B C D E F G H I J K L M N O P Q R S T U V W X Y Z μSR see Muon spin spectroscopy …   Wikipedia

  • Nicotinamide adenine dinucleotide — Nicotinamide adenine dinucleotide …   Wikipedia

  • Moderne Untersuchungsmethoden in der Zellbiologie — Um die Funktion von Zellen zu verstehen und unter dem optischen Auflösungsvermögen von Lichtmikroskopen liegende Strukturen aufzulösen, werden verschiedene moderne optische, chemische und biologische Methoden verwendet bzw. kombiniert. Diese… …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”