Sanding block

Sanding block

A sanding block is a block used to hold sandpaper. In its simplest form, it is a block of wood or cork with one smooth flat side. Sanding blocks are also known as "Saracen blocks" in some construction fields. The user wraps the sandpaper around the block, and holds it in place (by inserting a fitted piece of cardboard under the sandpaper, one can soften the impact on the wood and protect against tears or uneven wear on the sandpaper).

Fancier versions use clips, teeth or clamps to hold the paper in place. Commercial versions can be constructed of various materials. They are usually sized to hold a quarter or half sheet of sandpaper. Some versions use the sandpaper belts intended for a power belt sander. Sanding blocks are helpful because they prevent the "waves" created by plain sandpaper.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • sanding block — A block of rubber or plastic to which the sandpaper is fastened, offering the operator a good grip. The block should be used for most sanding jobs because it distributes the pressure evenly and gives a more uniform surface …   Dictionary of automotive terms

  • block — That part of the engine containing the cylinders. Also see bearing block big block block heater brake block brake pad cylinder block die EN block en block engine block he …   Dictionary of automotive terms

  • sanding — See block sanding wet sanding …   Dictionary of automotive terms

  • block sanding — The process of using a wooden block wrapped in sandpaper to sand the material …   Dictionary of automotive terms

  • Wood finishing — refers to the process of embellishing and/or protecting the surface. The process starts with surface preparation, either by sanding by hand (typically using a sanding block or power sander), scraping, or planing. Imperfections or nail holes on… …   Wikipedia

  • Marquetry — The image on the cover of this box was made using the technique of marquetry. In contrast, thi …   Wikipedia

  • Drawknife — A drawknife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer (along the cutting edge) than it is deep (from cutting edge to back edge). It… …   Wikipedia

  • Sander — This article is about the power tool. For other uses, see Sander (disambiguation). A random orbit sander, with disks of various grit sizes A sander is a power tool used to smooth wood and automotive or wood finishes by abrasion with sandpaper.… …   Wikipedia

  • List of Canada's Worst Handyman episodes — This is a list of episodes for the first season of the Canadian television series Canada s Worst Handyman , where the worst contestant, as determined by 25 challenges over 12 days, is given the dubious title. Format Each of the first five… …   Wikipedia

  • Die grinder — A pneumatic die grinder with a right angle head. A die grinder is a handheld power tool used to grind, sand, hone, polish, or machine material, typically metal but also plastic or wood. They are usually pneumatically driven, although versions… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”