String potentiometer

String potentiometer

A string potentiometer is a transducer used to detect and measure linear position and velocity using a flexible cable and spring-loaded spool. Other common names include "string pot", "cable-extension transducer", "draw wire sensor", and "yo-yo sensor".

String Potentiometers are composed of four main parts:

# measuring cable
# spool
# spring
# rotational sensor

Inside the transducer's housing, a stainless steel cable is wound on a precisely machined constant diameter cylindrical spool that turns as the measuring cable reels and unreels.

To maintain cable tension, a torsion spring is coupled to the spool. The spool is coupled to the shaft of a rotational sensor (a potentiometer or encoder). As the transducer's cable extends along with the movable object, it causes the spool and sensor shafts to rotate. The rotating shaft creates an electrical signal proportional to the cable's linear extension or velocity.

Applications

String potentiometers are used to measure a moving object. The measurement cable can be connected directly to the moving part, to give a direct measurement of the point of interest. This simple type of measurement device has been in use by engineers and designers for about 40 years. String potentiometers are generally durable, simple to use, and inexpensive.

The original application for string pots in the 1960’s was aerospace cyclic fatigue testing. Engineers designed and built these units originally to measure movement of airplane parts as they were cycled during testing. Today, the string pot is used both for testing and as a component of equipment. Common applications include :
* Hydraulic cylinder position measurement,
* automotive and aerospace testing,
* factory automation,
* medical devices,
* oil and chemical,
* structural testing,
* industrial machinery,
* robotics.

Hydraulic cylinders are used in many industries such as forklifts, cranes and aerials, material handling, die-casting, oil and gas, robotics and automation. Measurement or control of the extension of the cylinder requires a position transducer, and often a string potentiometer is used.

The string potentiometer may be connected as a three-wire tapped resistor (voltage divider), in a control circuit, or may be packaged with electronics to produce a measurement signal in a useful form, such as a variable voltage 0-10 VDC, variable current [ [4-20mA] , pulse encoder, Bus (DeviceNet and Canbus) and RS232 communications.

Measurement ranges vary from about 1 inch to over 100 feet and are available in many appropriate package sizes.

Limitations of the method

Since the measuring cable may sag or be deflected by wind or gravity, the overall precision of a string potentiometer measurement is limited. The cable mechanism limits the speed at which the measured object can move. Changing temperatures affect both the length of the cable and the resistance value of the potentiometer. Where multiple objects, such as articles on an assembly line, or objects that are hot or coated with wet paint are to be measured, a non-contacting method is required.

Other linear position measurements methods include LVDTs, capacitive and inductive sensors, and rack-and-pinion transducers that convert linear motion into rotary motion. Optical (time-of-flight), ultrasonic, and radar transducers exist and find specialized applications.

External links

* [http://celesco.com/faq/cet.htm String Pot: Diagrams and Explanations]
* [http://www.firstmarkcontrols.com/s054b.htm String Potentiometer and String Encoder Engineering Guide]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Potentiometer — This article is about the electrical component. For the measuring instrument, see Potentiometer (measuring instrument). Potentiometer A typical single turn potentiometer Type Passive Electronic s …   Wikipedia

  • Position sensor — A position sensor is any device that enables position measurement. It can either be an absolute position sensor or a relative one (displacement sensor). Position sensors can be either linear or angular.Some position sensors available today: *… …   Wikipedia

  • Transducer — A transducer is a device, usually electrical, electronic, electro mechanical, electromagnetic, photonic, or photovoltaic that converts one type of energy or physical attribute to another for various purposes including measurement or information… …   Wikipedia

  • SpaceAge Control — Infobox Company company name = SpaceAge Control, Inc. company company type = Private company slogan = Air Data and 3D Displacement Sensors for a Demanding World foundation = 1968 location = Palmdale, California industry = Aerospace Manufacturing… …   Wikipedia

  • Dumble Amplifiers — Tom McGrath s Dumble ODS 50W Combo Converted to Head and Cabinet by Doug Stalters of Vintone Circuits Dumble musical instrument amplifiers are custom manufactured in very limited numbers by Alexander Howard Dumble of Los Angeles, California.… …   Wikipedia

  • Humbucker — A conventional humbucker (or Humbucking pickup) is a type of electric guitar pickup that uses two coils, both generating string signal. Humbuckers have high output since both coils are in series and because the magnetic circuit is low loss. Like… …   Wikipedia

  • Fender Bass VI — Infobox Guitar model|title=Fender Bass VI bgcolor=#FFFFFF manufacturer=Fender period=1961 1975, 2006 bodytype=Solid necktype=Bolt on scale=30 woodbody=Alder woodneck=Quartersawn Maple, C shaped woodfingerboard=Rosewood bridge=Vintage style… …   Wikipedia

  • Guitar effects — are electronic devices that modify the tone, pitch, or sound of an electric guitar, or condition or reroute the signal in some fashion. Effects can be housed in small effects pedals ( stomp boxes ), guitar amplifiers, guitar amplifier simulation… …   Wikipedia

  • Electric guitar — Fender Stratocaster String instrument Classification String instrument (plucked, either by fingerpicking, or with a pick.) …   Wikipedia

  • Guitar — Infobox Instrument name=Guitar names= classification=String instrument (plucked, nylon stringed guitars usually played with fingerpicking, and steel , etc. usually with a pick.) range= (a regularly tuned guitar) related=*Bowed and plucked string… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”