Baltimore and Ohio Railroad locomotives

Baltimore and Ohio Railroad locomotives

On the Baltimore and Ohio Railroad, locomotives were always considered of great importance, and the railroad was involved in many experiments and innovations.

History

Early locomotives

The name "Tom Thumb" is forever associated with the B&O, as the first steam locomotive built in the United States for an American railroad. It was built strictly as a demonstrator, but it was succeeded by a series of similar locomotives (the "Grasshoppers" and the "Crabs") designed by Ross Winans, the first head of motive power on the railroad. Early B&O designs were quite unlike those used on other roads, due to in-house design and the emphasis of pulling power. 4-2-0 locomotives from Norris (represented by the "Lafayette" reproduction in the B&O museum's collection) were the anomaly on a railroad which was already building eight-coupled (0-8-0) locomotives well before the Civil War. By the beginning of the war, new power on the railroad had become more conventional, though many of the older, unconventional designs remained.

Up until 1884 locomotive numbers were reused when locomotives were retired; numbers were not allocated sequentially (unless lower numbers were used up). In 1884, in order to reduce confusion, all locomotives were renumbered to group like locomotives together, and thereafter numbers were retired along with the locomotive to which they referred.

The Baltimore Belt Line and electrification

John W. Garrett's desire to have a line to New York led to the construction of the Baltimore Belt Line in order to bring the railroad across Baltimore. The most important feature of this was the Howard Street Tunnel, which began at Camden Station and headed north to Mount Royal Station. Objections to use of steam led, in 1895, to the first main line electrification in North America. Trains in one direction were pulled through the tunnel, by a series of electric locomotives that lasted until the end of steam; in the other direction, the train simply drifted down the slope. Dieselization made the electrification unnecessary and it was discontinued in 1952.

"Old Maude"

Another innovation was the introduction of Mallet locomotives. Economies in haulage could be achieved by reducing the number of locomotives and trains needed, so ever more powerful locomotives were always sought. In 1900 #2400, a 0-6-6-0 design, was introduced, and quickly became known as "Old Maude" after a mule in a cartoon. It was the first Mallet in North America. Mallets were built in large numbers for the B&O, culminating in the huge EM-1 2-8-8-4.

"Uncle Dan" and Colonel Emerson

In the presidency of Daniel Willard, the motive power department, headed by Col. George H. Emerson, entered on a long series of experiments intended to improve the performance of the steam locomotive. Particular emphasis was placed on the water tube boiler, as opposed to the fire tube boiler used from the earliest days of steam. (In practice, only the firebox used water tubes.) The culmination of these experiments was the duplex #5600 "George H. Emerson", the first of its kind. It was to be succeeded by a visionary locomotive of a unique design, of which very little was built before the whole project was cancelled.

Many other trials were conducted of steam locomotive appliances, very few of which had any lasting impact.

At the turn of the century various compound locomotives were tried, particularly of the Vauclain and tandem patterns. As on other roads, they presented maintenance problems, and only the Mallets were repeated. Some engines had scoops to take on water from track pans, which were found on the line to New York.

The P-7 "president" engines were originally painted olive green, with the name of a United states president in gold on the cab; later they were painted a dark blue. Certain experimental engines had a British-style firebox door instead of the usual American type.

Diesels

Other trials, it can be said, changed the face of railroading. In 1925 the B&O was one of the buyers of the first model of diesel locomotive, of which CNJ 1000 was the first example. These were used as yard engines in areas where smoke abatement led to restrictions or bans on the use of steam. In 1935 a single unit mainline diesel-electric engine (#50) was constructed; this was eventually transferred to the Chicago and Alton Railroad, an affiliated line.

Finally in 1937 the B&O bought the first multiple unit diesel locomotives to power its passenger trains. The railroad put an end to the steam locomotive experiments, though wartime pressures would lead to purchase of many other new steam locomotives. Dieselization took many years, and in the meantime a long program of upgrading older locomotives was continued. The P-7 Pacifics were particularly targeted for improvements, culminating in the "Cincinatian", for which four of the engines were upgraded and streamlined to a design by Olive Dennis, who also supervised the refurbishment of the rolling stock.

The B&O did not emphasize standardization, and when road diesels were bought, they were purchased from nearly every manufacturer. By the time of the railroad's purchase in 1963, though, they were well on their way to becoming the all-EMD line which they remained to the end.

In 1954 a group of steam switchers was renumbered to free up numbers in the 600s and 700s for diesels. Then in 1956 all locomotives were renumbered again. All steam locomotives were renumbered below 1000, thus freeing all four digit numbers for use by the growing numbers of diesels.

Locomotive Classification

Before the Civil War, the B&O organized its locomotives into four classes, based upon relative power. After the war this was felt to be inadequate, and a classification scheme was devised, based upon wheel arrangement. Each wheel arrangement was assigned a letter, except for 4-4-0 locomotives, which were subdivided according to cylinder size. When articulated steam locomotives were first introduced, they were assigned a single class ("O"). This proved inadequate almost immediately and a two letter code was used instead, based on treating the locomotive as if it were two engines coupled back-to-back.

Within each letter class, a number was assigned for each successive design. Usually the first class was numbered "1". Locomotives acquired through mergers were renumbered and reclassified to fit into the sequences of numbers and classes.

Lowercase letter suffixes were used to denote successive modifications of a design. The "t" suffix was also used to indicate that the locomotive was assigned an extra large tender. In the twentieth century, such modifications were common, and the pattern of suffixes could become confusing. At one point there was even a class "Q"odd" Mikado (2-8-2).

Diesel locomotives were initially classified according to intended service and model. Eventually this was dropped in favor of using the manufacturer's model designations.

Steam classes were as follows:
*A initially 4-6-0 camelback locomotives; later 4-4-2
*B 4-6-0
*C 0-4-0
*D 0-6-0
*E 2-8-0
*F 4-4-0 with 16" dia. cylinders or less
*G 4-4-0 with 17" dia. cylinders
*H 4-4-0 with 18" dia. cylinders
*I 4-4-0 with 19" dia. cylinders
*J 4-4-0 and 4-4-4 with Wootten fireboxes
*K 2-6-0
*L 0-8-0
*M 4-4-0 with 20" dia. cylinders
*N 4-4-4-4
*O originally for any Mallet type; replaced by two letter code
*P 4-6-2
*Q 2-8-2
*R 0-4-4 Forney locomotives
*S 2-10-2
*T 4-8-2
*U 0-10-0
*V 4-6-4
*W 4-2-2-2-2-4 geared locomotive (never built)
*Y 2-10-0

Articulated classes:
*DD 0-6-6-0
*EE 2-8-8-2
*EL 2-8-8-0
*EM 2-8-8-4
*KB 2-6-6-4
*KK 2-6-6-2
*KL 2-6-8-0
*LL 0-8-8-0
*MK 4-4-6-2

Electric locomotive classes were as follows:
*LE-1 the original Bo+Bo motors
*LE-2 Bo-Bo motors intended for freight haulage
*OE-1, OE-2, 'OE-3 Bo-Bo
*CE-1 Bo switcher

There was one gasoline-powered locomotive:
*CG 0-4-0

Notable classes and locomotives

*"Tom Thumb" was the first steam locomotive used in the United States
*2400 "Old Maude" (Class O) was the first Mallet in the United States
*5600 "George H. Emerson" (Class N-1) was the first duplex locomotive
*Class Q-3 was the USRA Light Mikado including the very first built (#4500)
*Class P-7 was the "president" series of pacifics (4-6-2)
*Class C-16 was the "Little Joe" or "Dockside" switchers
*Class LE-1 locomotives were the first mainline electric locomotives
*The class EM-1 simple articulated locomotives were the largest locomotives run on the B&O

References

*Sagle, Lawrence W. "B&O Power: Steam, Diesel and Electric Power of the Baltimore and Ohio Railroad 1829 - 1964", Alvin F. Staufer, 1964


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Baltimore and Ohio Railroad — Infobox SG rail railroad name=Baltimore and Ohio Railroad logo filename=Baltimore and Ohio Herald.png logo size=100 system map size =260 map caption =1876 B O map old gauge= marks=BO locale=New York City, New York via Philadelphia, Pennsylvania,… …   Wikipedia

  • Baltimore and Ohio Railroad — Réseau de la B O en 1891. La Baltimore and Ohio Railroad (B O) est un ancien chemin de fer américain de classe I qui exista de 1827 à 1986. Sa première ligne reliait le port de Baltimore (Maryland, États Unis) à la rivière Ohio au près de… …   Wikipédia en Français

  • Baltimore and Ohio Railroad Martinsburg Shops — Infobox nrhp | name =Baltimore and Ohio Railroad Martinsburg Shops nrhp type =nhl caption = B O Martinsburg West Roundhouse location= 300 East Martin Street, Martinsburg, West Virginia locmapin = West Virginia area = built =1866 architect= Albert …   Wikipedia

  • Appalachian and Ohio Railroad — The Appalachian and Ohio Railroad reporting mark|AO is a class III railroad operating in West Virginia.Originally the Cowen and Pickens Subdivisions of the Baltimore and Ohio Railroad, the railroad was a part of CSX until it was bought by Watco… …   Wikipedia

  • Little Joe (Baltimore and Ohio locomotive) — Infobox Locomotive name=B O class C 16 powertype=Steam gauge=4 ft 8 frac12; in (1435 mm) railroad=Baltimore and Ohio Railroad whytetype=0 4 0T uicclass=B valvegear = Walschaerts railroadclass=C 16 nicknames= Little Joe , Dockside builder=Baldwin… …   Wikipedia

  • Chesapeake and Ohio 614 — Chesapeake Ohio 614 Power type Steam Builder Lima Locomotive Works Serial number 9306 Build date June 1948 Configuration 4 8 4 UIC classification 2′D2′ h2 Gauge …   Wikipedia

  • Chesapeake and Ohio Railway — The C O system map in 1950. Reporting mark C O, CO Locale District of Columbia …   Wikipedia

  • Wilmington and Western Railroad — Reporting mark WWRC Locale New Castle County, Delaware, USA Dates of operation 1982– Track gauge …   Wikipedia

  • Buffalo and Susquehanna Railroad — Le Buffalo and Susquehanna Railroad (B S) était un chemin de fer américain de classe I qui fut créé en 1893 suite à la fusion et à la consolidation de petits chemins de fer forestiers[1]. Il conserva indépendance jusqu à ce que le Baltimore and… …   Wikipédia en Français

  • Winchester and Potomac Railroad — The Winchester and Potomac Railroad was an historic railroad in the Southern United States, which ran from Winchester, Virginia to the Baltimore and Ohio Railroad junction at Harpers Ferry on the Potomac River [Black, p. xxiii] . The W P Railraod …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”