Glaze3D

Glaze3D

Glaze3D was a family of graphics cards announced by BitBoys Oy on August 2, 1999 that would have produced substantially better performance than other consumerPetri Nordlund. "Glaze3D". Bitboys Oy.] products available at the time. The family, which would have come in the Glaze3D 1200, Glaze3D 2400 and Glaze3D 4800 models, was supposed to offer full support for DirectX 7, OpenGL 1.2, AGP 4×, 4× anisotropic filtering, full-screen anti-aliasing and a host of other technologies not commonly seen at the time. The 1.5 million gate GPU would have been fabricated by Infineon on a 0.2 μm eDRAM process, later to be reduced to 0.17 μm with a minimum of 9 MB of embedded DRAM and 128 to 512 MB of external SDRAM. The maximum supported video resolution was 2048×1536 pixels.

Development History

The Glaze3D family of cards were developed in several generations, beginning with the original Glaze3D "400" with multi-channel RDRAM instead of internal eDRAM. This was offered only as IP but with no takers. Bitboys revised the design and decided to have it manufactured themselves, in cooperation with Infineon Technologies, the chip fabbing arm of Siemens. They came up with a new Glaze3D pitched for release in Q1, 2000. The card promised extremely high performance compared to contemporary consumer GPUs. As bug-hunting, validation and manufacturing problems delayed the launch, new features became necessary and a DX7 variant with built-in hardware Transform & Lighting was announced, but never appeared.

The GPU was later redesigned under a new codename, Axe, to take advantage of DirectX 8 and compete with a developing competition. The new version sported such features as an additional 3 MB of eDRAM, proprietary Matrix Antialiasing and a vastly improved fillrate, as well as offering a programmable vertex shader and widened internal memory bus. The new card was to have been released as Avalanche3D by the end of 2001.

The third development, codenamed Hammer, started development as Axe lost viability toward the end of 2001. This new card was to be a high-end DirectX 9 part, offering new features such as occlusion culling, improved rendering performance and various other innovations. This version, like the ones before it, never shipped commercially.

Bitboys turned to mobile graphics and developed an accelerator licensed and probably used by at least one flat panel display manufacture, although it was intended and designed primarily for higher-end handhelds. Later on ATI bought Bitboys for an extra research and development unit, so as of 2008 Bitboys is owned by AMD.

Performance Claims

The Glaze3D family was well-known for the bold performance claims that were associated with it. The low-end 1200 model was purported to achieve a fillrate of 1.2 billion texels per second, with a geometry throughput of 15 million triangles per second. Most importantly, the card was originally claimed to achieve over 200 frames per second in id Software's Quake 3 at maximum visual quality.cite web
url=http://www.shugashack.com/docs/press/080299bitboysoy.htm
title=BITBOYS OY UNVEILS GLAZE3D PRODUCT FAMILY|accessdate=2006-06-11| author=BitBoys Oy
]

The 1200 model's claimed specifications would place it as the rough equivalent of the GeForce FX 5200 Ultra or Radeon 9200 Pro, while its claimed performance would place it at the same level as the GeForce 3 Ti 500 or Radeon 8500. To compound matters, the cards' specifications were later updated to nearly double their original performance levels.

While the Glaze3D 1200 was supposed to achieve unheard of performance in video games, it was claimed that the 2400 and 4800 models would each be substantially more powerful in turn. Using two and four GPU configurations respectively, and including an additional geometry accelerator on the 4800, the higher-end Glaze3D cards were to be aimed at the very highest end of the video gaming market.

ee also

*ATI Technologies
*NVIDIA

References

External links

* [http://www.shugashack.com/docs/press/080299bitboysoy.htm Glaze3D Announced]
* [http://www.graphicshardware.org/previous/www_1999/presentations/glaze3d.pdf PDF version] of a presentation by Petri Norlund, Chief Architect at BitBoys Oy in 1999.
* [http://www.firingsquad.com/features/siggraph99/default.asp BitBoys at Siggraph] - analysis of the Glaze3D cards.
* [http://www.firingsquad.com/hardware/bitboys/default.asp A Look Inside BitBoys] - a detailed description of the development history of Glaze3D.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Bitboys — Oy Rechtsform Oy (finnische Aktiengesellschaft) Gründung 1991 Auflösung …   Deutsch Wikipedia

  • Bitboys Oy — war ein finnisches Unternehmen mit Sitz in Noormarkku, das sich mit der Entwicklung von 3D Grafikchips für den PC und Mobilbereich (PDAs, Handys usw.) befasste. Das Unternehmen wurde im Jahr 1991 gegründet und beschäftigte seither einige… …   Deutsch Wikipedia

  • Hammer (disambiguation) — A hammer is a type of tool.Hammer may also refer to:People* Hammer (surname) * Hammer (nickname) * Hammer people, a tribe in Ethiopia * Captain Hammer, a fictional superhero * MC Hammer, a music artistPlaces* Hamre, Osterøy, a municipality in… …   Wikipedia

  • Axe (disambiguation) — An axe (or ax) is a tool with a metal blade, commonly used to split wood, also historically used as a weapon.Axe may also refer to: * Axe (Lynx), a brand of men s body spray which acts as both cologne and deodorant. * Axe!, a 1977 American horror …   Wikipedia

  • List of vaporware — Wired magazine has an annual Vaporware Award with a list of software it considers vaporware. cite news |first= |last= |authorlink= |coauthors= |title=Vaporware: Better Late Than Never |url=http://www.wired.com/science/discoveries/news/2006/02/7014… …   Wikipedia

  • BitBoys — Oy is a hardware development and licensing company based in Finland, founded in 1991 and acquired by ATI Technologies for up to US$44M on May 2, 2006. [cite news |title=ATI acquires Bitboys |url=http://www.theinquirer.net/en/inquirer/news/2006/05/… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”