Analog signal

Analog signal

An analog or analogue signal is any continuous signal for which the time varying feature (variable) of the signal is a representation of some other time varying quantity, i.e analogous to another time varying signal. It differs from a digital signal in that small fluctuations in the signal are meaningful. Analog is usually thought of in an electrical context; however, mechanical, pneumatic, hydraulic, and other systems may also convey analog signals.

Essentially an analogue signal can be thought of as a simulation or duplication of one continuous time varying quantity in another, possibly different, time varying quantity. It is then a mapping of one time varying quantity to another, often with the intent of recording or transmitting information about the former within the medium of the latter.

An analog signal uses some property of the medium to convey the signal's information. For example, an aneroid barometer uses rotary position as the signal to convey pressure information. Electrically, the property most commonly used is voltage followed closely by frequency, current, and charge.

Any information may be conveyed by an analog signal; often such a signal is a measured response to changes in physical phenomena, such as sound, light, temperature, position, or pressure, and is achieved using a transducer.

For example, in sound recording, fluctuations in air pressure (that is to say, sound) strike the diaphragm of a microphone which causes corresponding fluctuations in a voltage or the current in an electric circuit. The voltage or the current is said to be an "analog" of the sound.

Data is more easily corrupted in analogue form due to noise but may also be of higher density and processed more quickly. A 3 hour Domestic VHS cassette could hold for example 16GB of data ["Concise Dictionary of Computing." Penguin Reference - Penguin Books - pages 11-12.] .

Any measured analog signal must theoretically have noise and a finite slew rate. Therefore, both analog and digital systems are subject to limitations in resolution and bandwidth. In practice, as analog systems become more complex, effects such as non-linearity and noise ultimately degrade analog resolution to such extent that the performance of digital systems may surpass it. In analog systems, it is difficult to detect when such degradation occurs. However, in digital systems, degradation can not only be detected but corrected as well.

Disadvantage

The primary disadvantage of analog signaling is that any system has noise – i.e., random unwanted variation. As the signal is copied and re-copied, or transmitted over long distances, these random variations become dominant. Electrically, these losses can be diminished by shielding, good connections, and several cable types such as coaxial or twisted pair.

The effects of noise creates signal loss and distortion, that is impossible to recover, since amplifying the signal to recover attenuated (distorted) parts of the signal amplifies the noise (distortion/interference) as well. Even if the resolution of an analog signal is higher than a comparable digital signal, in many cases, the difference is overshadowed by the noise in the signal.

Modulation

Another method of conveying an analog signal is to use modulation. In this, some base signal (e.g., a sinusoidal carrier wave) has one of its properties modulated: amplitude modulation involves altering the amplitude of a sinusoidal voltage waveform by the source information, frequency modulation changes the frequency. Other techniques, such as changing the phase of the base signal also work.

Analog circuits do not involve quantisation of information into digital format. The concept being measured over the circuit, whether sound, light, pressure, temperature, or an exceeded limit, remains from end to end.

Clocks with hands are called analog; those that display digits are called digital. However, many analog clocks are actually digital since the hands do not move in a smooth continuous motion, but in small steps every second or half a second, or every minute.

See digital for a discussion of "digital vs. analog".

Sources: Parts of an earlier version of this article were originally taken from Federal Standard 1037C in support of MIL-STD-188.

ee also

* Analog device
* Analog sound vs. digital sound
* Digital signal
* Analog signal processing

References


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • analog signal —  Analog Signal  Аналоговый сигнал   Сигнал, область определения которого составляет непрерывное пространство, то есть пространство, не являющееся дискретным. См. Цифровой сигнал …   Толковый англо-русский словарь по нанотехнологии. - М.

  • analog signal — tolydusis signalas statusas T sritis fizika atitikmenys: angl. analog signal; analogue signal; continuous signal vok. analoges Signal, n; kontinuierliches Signal, n; stetiges Signal, n rus. аналоговый сигнал, m; непрерывный сигнал, m pranc.… …   Fizikos terminų žodynas

  • analog signal — analoginis signalas statusas T sritis automatika atitikmenys: angl. analog signal; analogue signal vok. analoges Signal, n; Analogsignal, n rus. аналоговый сигнал, m pranc. signal analogique, m; signal analogue, m …   Automatikos terminų žodynas

  • analog signal — analoginis signalas statusas T sritis Standartizacija ir metrologija apibrėžtis Signalas, išreiškiamas laiko funkcija, kartojančia atitinkamo dydžio kitimo dėsnį. atitikmenys: angl. analog signal; analogue signal vok. analoges Signal, n;… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • analog signal — analoginis signalas statusas T sritis fizika atitikmenys: angl. analog signal; analogue signal vok. analoges Signal, n; Analogsignal, n rus. аналоговый сигнал, m; непрерывный сигнал, m pranc. signal analogique, m; signal analogue, m …   Fizikos terminų žodynas

  • analog signal — tolydusis signalas statusas T sritis informatika apibrėžtis Signalas, dažniausiai elektrinis, kurio vertė (įtampa, srovė) yra ↑tolydusis dydis. atitikmenys: angl. analog signal; continuous signal ryšiai: dar žiūrėk – tolydusis dydis palygink –… …   Enciklopedinis kompiuterijos žodynas

  • analog signal — analoginis signalas statusas T sritis informatika apibrėžtis Signalas, kurio vertė (įtampa, srovė) yra ↑analoginis dydis. atitikmenys: angl. analog signal ryšiai: dar žiūrėk – analoginis dydis palygink – skaitmeninis signalas palygink – tolydusis …   Enciklopedinis kompiuterijos žodynas

  • Analog signal processing — is any signal processing conducted on analog signals by analog means. Analog indicates something that is mathematically represented as a set of continuous values. This differs from digital which uses a series of discrete quantities to represent… …   Wikipedia

  • analog signal — noun A signal that can vary in a continuous manner (as opposed to a digital signal that only takes discrete values) …   Wiktionary

  • analog signal —    An electrical signal that varies in amplitude or frequency depending on various changes such as sound, light, heat, etc …   IT glossary of terms, acronyms and abbreviations

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”