NCC Class Y

NCC Class Y
Power type	Steam
Builder	No.18: W. G. Bagnall & Co., Stafford No.19: Hunslet Engine Company, Leeds
Build date	No.18: 1926 No.19: 1928
Configuration	0-6-0T
Gauge	5 ft 3 in (1,600 mm)
Driver diameter	4 ft 7 in (1.397 m)
Wheelbase	16 ft 6 in (5.03 m)
Length	31 ft 4 3⁄4 in (9.57 m)
Width	8 ft 9 in (2.67 m)
Height	12 ft 6 7⁄8 in (3.83 m)
Axle load	14 ton 3 cwt + 17 ton 14 cwt + 17 ton 13 cwt
Locomotive weight	49 long tons 10 cwt (110,900 lb/50.3 t)
Fuel type	Coal
Fuel capacity	2.25 long tons (2.29 t)
Water capacity	1,200 imperial gallons (5,500 l; 1,400 US gal)
Boiler pressure	160 psi (1,103.2 kN)
Heating surface: Tubes	967.5 sq ft (89.88 m2)
Heating surface: Firebox	97 sq ft (9.0 m2)
Heating surface: Total	1,064.5 sq ft (98.90 m2)
Cylinders	Two, inside
Cylinder size	18 × 26 in (457 × 660 mm)
Valve gear	Stephenson link
Tractive effort	20,830 lbf (92.7 kN)
Factor of adhesion	5.32
Train brakes	Automatic vacuum
Career	LMS NCC / UTA
Number in class	2
Number	18, 19
Scrapped	No.18: 1956 No.19: 1963

The LMS Northern Counties Committee (NCC) Class Y was a class of 0-6-0T steam locomotives formed when two LMS Fowler Class 3F engines (Nos.7456 and 7553) were regauged from standard gauge to the 5 ft 3 in (1600 mm) Irish broad gauge in 1944 becoming NCC Nos.18 and 19.

History

During World War II, the NCC was very short of shunting motive power and as no new engines were available, three engines were transferred from the Dundalk, Newry and Greenore Railway (DNGR). The DNGR engines were not a success and the NCC turned to the parent LMS for help. They offered two standard LMS Fowler Class 3F 0-6-0T locomotives.

These engines had been developed from S. W. Johnson's Midland Railway locomotives introduced in 1899. Johnson's locomotives were originally built with round-topped fireboxes but they were all rebuilt with Belpaire fireboxes from 1919.

Developed by Sir Henry Fowler for the LMS and introduced in 1924 the new locomotives had a Belpaire firebox from new, wider side tanks, larger bunker and an extended smokebox. A ventilator was also fitted in the cab roof. This class became the LMS "standard" shunting locomotive. With the exception of a batch of 15 locomotives which were built by the former Lancashire and Yorkshire Railway workshops at Horwich, Lancashire, all were built by outside contractors.

NCC No.18, originally LMS No. 16539, was part of a batch of 15, numbered from 16535–16549, built by W. G. Bagnall & Co. of Stafford in 1926/7. In the LMS 1934 renumbering scheme it became No.7456.

NCC No.19, originally LMS No. 16636, was part of a large batch of 50 locomotives built by the Hunslet Engine Company of Leeds, West Yorkshire, between 1927 and 1929 and originally numbered from 16625–16674. It was renumbered 7553 in the 1934 renumbering scheme.

The engines were reboilered by the LMS in 1944, just before delivery to the NCC in August. The conversion to 5 ft 3 in (1.60 m) gauge was simply done by reversing the wheels and renewing the tyres and crank pins. Their frames were not altered at all and, possibly due to the light nature of their work, the engines do not seem to have suffered from widening the gauge.

One unusual feature of the engines was the position of the sandboxes which entailed having recesses in the tanks so that they could be filled. Another distinctive feature, and uncommon on the NCC, was the provision of "dogs" around the circumference of the smokebox to keep the joint airtight.

Designated Class Y, the engines were at first used on local trains to Carrickfergus but this practice was discontinued when it was discovered that the bearings were inclined to run hot. A test train of thirty wagons of coal was worked by No.19 from Belfast to Ballyclare Junction without any difficulty. No.18 worked a similar train but had trouble with lubrication.

Subsequently, they were put to work on the Belfast Harbour Commissioners' lines at Belfast docks where despite their relatively long wheelbase they could negotiate a 4 chain (80 m) curve if they proceeded slowly.

Altogether No.18 ran 219,441 miles (353,160 km) on the NCC and a total of 612,266 miles (985,350 km) in her life. A suspect crank pin led to her early withdrawal in 1956. No.19 ran 667,521 miles (1,074,270 km) altogether, of which 291,971 miles (469,880 km) were on the NCC. She lasted until 1963 although not doing much work in her final year.

In late Spring 1960 the Ulster Transport Authority acquired two 0-6-4Ts from the former Sligo, Leitrim and Northern Counties Railway, which took over duties on Belfast docks. These became Nos.26 and 27 in the UTA stock list and continued to carry the names Lough Melvin and Lough Erne respectively.

Livery

All over black, red buffer beams with numbers in shaded digits. Lettered NCC on side tank, cast number plate with red background applied to bunker sides.

Under the ownership of the UTA that company's crest was applied to the side tanks in place of the NCC lettering.

References

• Arnold, R.M. (1973). NCC Saga. Newton Abbot: David & Charles. ISBN 0 7153 5644 5. 
• Arnold, R.M. (1973). Supplement to NCC Saga. Whitehead: Railway Preservation Society of Ireland. 
• London Midland and Scottish Railway (Northern Counties Committee). Class Y general arrangement drawing. Belfast: LMS (NCC). 
• Scott, W.T. (January 1968). "The Shunting Tanks of York Road". Five Foot Three 4: 2–10