GWR 455 Class

GWR 455 Class
In service at Bugle in Cornwall, around 1910
3588 at Swindon in 1950, after withdrawal

The GWR 455 Class, also called the "Metropolitan" or "Metro" Tanks, was a series of 140 2-4-0T tank locomotives built for the Great Western Railway, originally for their London suburban services, including running on the underground section of the Metropolitan Railway, the source of their nickname. Later on the class was seen on many other parts of the GWR system. 60 "Metro" Tanks were built, from 1868 onwards, during the lifetime of their designer, Joseph Armstrong, and his successor William Dean regarded the class so highly that he would add a further 80, the final 20 examples appearing as late as 1899.

The "Metros" were all built at Swindon Works, in nine lots of ten or 20 engines each. They were numbered as followed:

  • 455-470, 3-6 (Lot 18, 1869)
  • 613-632 (Lot 25, 1871)
  • 967-986 (Lot 38, 1874)
  • 1401-1420 (Lot 47, 1878)
  • 1445-1464 (Lot 57, 1881/2)
  • 1491-1500 (Lot 91, 1892)
  • 3561-3570 (Lot 96, 1894)
  • 3581-3590 (Lot 117, 1899)
  • 3591-3599, 3500 (Lot 119, 1899)

Nos. 3-6 were briefly numbered 1096-1099 when new, and No. 3500 was numbered 3600 until December 1912. No. 3593 was rebuilt as a 2-4-2T in 1905.

The first two batches had inside frames on all axles, but subsequently the leading wheels had outside axleboxes. The original 20 engines had a shorter coupled wheelbase than all the others, 8'0" rather than 8'3". Nos. 455-470 were partially rebuilt with longer wheelbases when first reboilered, in the 1880s, though not between the coupled wheels. Many of the earlier engines were rebuilt with larger tanks when reboilered, while the locomotives built in 1899 had still larger side tanks and coal bunkers when new; Nos. 1401-1410 were likewise rebuilt with larger tanks about the same time. Because of all these variations, the class is said to have existed in Small, Medium and Larger varieties. They all had driving wheels of 5'0" diameter (later sometimes enlarged by the use of thicker tyres to 5'2") and 16" x 24" cylinders.

The earlier locomotives also differed from each other as to the boilers fitted. None of the originals had cabs - Armstrong always considered that these had a bad effect on the crew's attentiveness - but both half and full cabs were added later, and were provided from new on the later batches. A proportion of the class was intended to be fitted with condensing apparatus, for service on the Metropolitan: Nos. 613-622, 967-976, 1401-1410, and the engines of the last three batches. However, photographs show that some engines in the series did not in fact carry the apparatus. In their later years, from 1905, some of the class was fitted with autotrain apparatus for push-pull working.

Up to the electrification of the Metropolitan and the District in 1905-7, the Metros operated on various underground routes. The original GWR services (1863) on the Metropolitan were broad gauge, but from 1869 narrow gauge trains ran through to Moorgate Street; these were extended to Bishopsgate (Liverpool St) in 1875 and Aldgate in 1894. The GWR also provided about half the trains on the Hammersmith & City, and much of the Metropolitan's Aldgate-Paddington-Richmond service. The other principal service was the so-called Middle Circle, which differed from the later Circle Line in being routed via Addison Road (Olympia) and the West London Line. After the electrification of these services, the GWR continued to provide services from Notting Hill to Gunnersbury (until 1910) and from Old Oak Common to Victoria (until 1915); these were not in tunnel so did not require condensing locomotives. Naturally, the "Metro" tanks lost their condensing apparatus in their later years.

For the "underground" services the GWR maintained a fleet of about 50 "Metro" Tanks. Later the class continued to work on outer suburban services from Paddington, where O. S. Nock recalled many lively and precise runs with the class as late as c.1930.[1] They were finally ousted by the 6100 Class after the rebuilding of Bishop's Road station at Paddington in 1933. Other than this, the class found much use around the GWR's Southern Division. Typical centres were Swindon, Oxford and Gloucester, while others were also seen in South Wales and in the West of England. They even hauled main-line trains on cross-country routes such as Gloucester-Cardiff, being capable of remarkably fast running when needed. After the end of their "underground" work some also appeared in the Northern Division, at Wellington and elsewhere.

Withdrawal of the earlier locomotives began around 1900, though many others proved long-lived and worked on into the 1930s. Ten of the William Dean 3561-3599 series survived in British Railways ownership in 1948, though the last of them, No. 3599, was withdrawn in December 1949.[2]

References

  1. ^ Nock 1990, p. 24.
  2. ^ Tabor 1959, pp. F28-F37.

Sources

  • Holcroft, Harold (1953). The Armstrongs of the Great Western. London: Railway World. 
  • Tabor, F. J. (1959). White, D. E.. ed. The Locomotives of the Great Western Railway, part six: Four-coupled Tank Engines. Kenilworth: RCTS. 
  • Nock, O. S. (1990). Great Locomotives of the Great Western Railway. Wellingborough: Patrick Stephens. ISBN 1-85260-157-4. 

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • GWR 3200 Class — Preserved GWR 9017 Earl of Berkeley at Horsted Keynes railway station Power type Steam Designer Charles Collett (rebuild) Rebuilder GWR …   Wikipedia

  • GWR Star Class — This is about the broad gauge locomotives for the later standard gauge 4 6 0s see GWR 4000 Class North Star replica (built in 1923 using some parts of the original) on display at Swindon, England, 2008 The Great Western Railway (GWR) Star Class… …   Wikipedia

  • GWR 4100 Class — Atbara class engine No. 3373 Atbara In 1897 the Great Western Railway (GWR) introduced the Badminton class express passenger 4 4 0 steam locomotives as a development from the earlier Duke class. The name Badminton was chosen after the Duke of… …   Wikipedia

  • GWR 3252 Class — The Great Western Railway Duke Class 4 4 0 steam locomotives for passenger train work, built in five batches between 1895 and 1899 for express working in Devon and Cornwall. William Dean was their designer, possibly with the collaboration of his… …   Wikipedia

  • British Rail Class 150 — Sprinter Newly refurbished First Great Western Class 150 No. 150265 at Newton Abbot, with a Paignton Exmouth working …   Wikipedia

  • LNER Class A4 4468 Mallard — Mallard Mallard at the National Railway Museum at York. Power type Steam Designer Sir Nigel Gresley Builder LNER Doncaster Works …   Wikipedia

  • LNER Class A4 — 60009 Union of South Africa in 1951 Power type Steam Designer …   Wikipedia

  • Great Western Railway — The Great Western Railway (GWR) was a British railway company and a notable example of civil engineering, linking London with the West Country, South West England and South Wales. It was founded in 1833, kept its identity through the 1923… …   Wikipedia

  • Locomotives of the Great Western Railway — The Great Western Railway had an uninterrupted life of over a century to develop its locomotive designs as it was barely affected by the Grouping of 1923. As a result its locomotive history is a long and interesting one. BackgroundNumbering and… …   Wikipedia

  • British diesel and electric multiple units — Multiple Unit is a term used to describe a train which does not have a separate locomotive. Typically these are passenger trains with accommodation in every vehicle and motors or engines distributed under the floor along the length of the train.… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”